Smart Corp Technologies warranty
3-Year Limited Warranty
We stand behind the film, controls, and installation we provide. Covered defects include the parts and labor needed to put your system right.
Customer-caused damage is excluded. This is repair-or-replacement coverage, with no money-back guarantee or change-of-mind returns.
Request warranty servicePolicy version: . Existing project promises remain in effect.
Three years
From documented installation completion.
Parts & labor
Film, supplied controls, and our workmanship.
Defects covered
Customer-caused damage is not covered.
What's Covered
For 3 years, Smart Corp Technologies warrants the film and system components we supply and install against material defects, and our installation work against workmanship defects, under normal intended use. Your quote, invoice, and completion record identify the covered system.
Smart film
Defects in the film we supply and install, including defect-related delamination, adhesion failure, or loss of switching function under normal intended use.
Supplied controls & connections
Defects in power supplies, switches, controllers, and installation connections we supply and install as part of the system identified in your project documents.
Installation workmanship
Defects in our installation work, including lifting, bubbles, edge-sealing, or connection problems caused by improper workmanship. These symptoms are assessed by cause, not automatically excluded.
Necessary parts and labor to repair or replace a covered defect are included without charge. This is our warranty; a separate manufacturer's warranty may provide additional rights and does not reduce this three-year promise.
Customer Damage & Other Exclusions
An exclusion applies only to the damage or failure it caused.
A scratch on one panel does not automatically cancel coverage for an unrelated defect on another panel. We assess the cause and explain the basis for any coverage decision.
Physical damage
Scratches, cuts, punctures, kinks, impacts, vandalism, or damage caused by customers, guests, pets, cleaners, or other contractors. Pulling, peeling, trimming, drilling, or attempting to remove the film can damage it.
Improper cleaning or added materials
Damage caused by cleaning methods or chemicals that conflict with the written care instructions supplied for your product, or by scraping, abrasive tools, unapproved adhesives, stickers, coatings, or objects attached to the film.
Alterations or incompatible electrical work
Damage caused by modifications, repairs, incorrect voltage, incompatible power supplies or controls, or other electrical work. A third party working on the system does not, by itself, cancel unrelated coverage.
External water, weather, or electrical events
Damage caused by flooding, building leaks, fire, lightning, power surges, or exposure outside the product's written approved conditions. Moisture damage caused by a defect in our installation or edge sealing remains eligible for review.
Glass, building, or other equipment
Pre-existing defects and failures in customer-owned glass, frames, window seals, building wiring, and third-party equipment are not covered products. Damage caused by structural movement or glass breakage unrelated to a covered defect is excluded.
Normal characteristics within agreed specifications
Disclosed characteristics such as some clear-state haze, viewing-angle differences, and light diffusion in privacy mode are not defects when within the agreed product specifications. A failure to meet agreed specifications may still be covered. Routine cleaning is not warranty service.
These exclusions do not remove our responsibility for a defect in covered products or our workmanship, or any responsibility that applicable law does not permit us to exclude.
Care & Protection
Follow the written care instructions for the exact film, edge seal, power supply, and controls installed. Ask us for another copy if needed, and share the instructions with cleaners and other contractors.
- Use a soft, non-abrasive cloth and only the cleaning products and methods approved in your supplied instructions. Do not assume a standard glass cleaner is suitable for the film.
- Keep liquid away from edges, wiring, and controls. Do not spray cleaner directly onto the film or its connections; follow the product-specific moisture guidance.
- Do not use blades, abrasive pads, or sharp tools. Do not puncture bubbles, peel edges, cut film, or open electrical components.
- Use the specified operating conditions and compatible controls. Contact us before painting, glazing, renovation, or electrical work near the installation.
- If you notice water near electrical parts, damaged wiring, unusual heat, or another safety concern, stop using the system and contact us. Use the normal controls to turn it off only if safe.
Do not perform unsafe tests or dismantle the installation to support a claim. Damage caused by a failure to follow the supplied care instructions is excluded; unrelated covered defects remain eligible.
Repair, Replacement & Returns
For an eligible claim, we will repair or replace the affected film or component and correct defective covered workmanship, using a suitable equivalent if the original product is unavailable. Covered service includes necessary parts and labor at no charge. Service is arranged within a reasonable time, taking account of diagnosis, safe access, and parts availability.
No money-back guarantee. No change-of-mind or satisfaction-based returns.
This limited warranty does not offer an automatic refund or a return because you change your mind about the installed product, its appearance within agreed specifications, or the project. Refunds or other remedies required by applicable law, and refund promises already made for an existing project, remain available.
If the issue is not covered, we can provide a paid repair or replacement quote. Any non-covered inspection, visit, or repair charge must be disclosed and approved before that paid service is performed. You are not required to approve paid work to receive service for an unrelated covered defect.
Repair or replacement continues coverage for the remaining original warranty period; it does not restart the three years, except where applicable law or a written project promise provides otherwise.
How to Request Warranty Service
- Contact us promptly. Call +1 (210) 996-0797 or email letstalk@smartcorptechnologies.com after noticing a suspected defect.
- Identify the project. Include your name, contact information, installation address, installation date if known, and invoice or other purchase evidence. If you cannot find your invoice, ask us to help locate the project record.
- Describe the issue. Explain what changed and which panels or controls are affected. Photos or a short video can help when safely available; do not operate a damaged system to record one.
- Allow assessment and access. We may troubleshoot remotely or arrange a reasonable inspection. We will explain whether the issue is covered and the proposed next step. Do not remove, cut, return, or ship any material before receiving instructions.
We assess whether the issue arose during the coverage period and the evidence supporting its cause, subject to applicable law. You do not need to complete a separate warranty-registration form to receive this coverage.
Warranty provider & support
Smart Corp Technologies+1 (210) 996-0797
letstalk@smartcorptechnologies.com
Contact us by phone or email to arrange warranty service. Do not ship film or equipment without instructions.
Warranty Period, Eligibility & Your Rights
Start date. Coverage begins on the documented installation-completion date and runs for three years. Keep the completion record and a copy of the warranty supplied with your project.
Purchaser and location. This warranty applies to the original purchaser of the covered installation at its original installed location, unless we agree to a transfer in writing or applicable law requires otherwise. Customer-owned equipment, DIY installations, product-only orders, and work performed independently by others are outside this installation warranty unless separately agreed in writing. Third-party work does not cancel unrelated coverage on our installed system.
Existing projects and written promises. This version applies to projects sold with these terms. Existing projects retain the warranty and refund promises made when ordered. A later website update does not retroactively reduce those rights. Any additional protections in your signed project documents remain in effect; request a written explanation of any project-specific terms before purchase.
Your legal rights. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Nothing in this policy disclaims applicable implied warranties or excludes rights, responsibilities, or remedies that cannot lawfully be excluded or limited.
Read this policy before ordering and keep a copy with your project documents. For website and quote-request terms, see our Terms of Service.
Common Warranty Questions
How long is the smart film warranty?
Our limited warranty lasts three years from the documented installation-completion date. It covers defects in the film and system components we supply and install, plus our installation workmanship, under normal intended use. Your project documents identify the installed system and completion date.
Are power supplies, switches, controllers, and labor covered?
Yes. Power supplies, switches, controllers, and installation connections that we supply and install are included for the same three-year period. For a covered defect, necessary repair or replacement parts and installation labor are provided without charge. Customer-owned devices and unrelated building electrical systems are not covered products.
What happens if I scratch or damage the film?
Scratches, cuts, punctures, peeling, impact damage, or cleaning damage caused by you or others are not covered. We can assess the damage and provide a paid repair or replacement quote. Damage to one panel does not automatically cancel coverage for unrelated defects elsewhere in the installation.
Are bubbles, peeling, or switching problems always excluded?
No. Bubbles, lifting, delamination, or switching failure may be covered when caused by a defect in the supplied product or our workmanship. The same symptoms can also result from impact, improper cleaning, or other external damage, so we review the cause before deciding coverage.
Do you offer a money-back guarantee or change-of-mind returns?
No. This limited warranty provides repair or replacement for covered defects. It does not offer satisfaction-based returns, change-of-mind returns, or an automatic refund. This does not restrict refunds or other remedies required by applicable law, or refund promises already made for an existing project.
Does someone else working on my glass cancel the warranty?
Not automatically. Damage caused by another contractor's work, incompatible equipment, or alterations is excluded to the extent that it caused the problem. Unrelated defects remain eligible. Contact us before work near the film so we can provide the installed product's care and protection requirements.
How do I request warranty service?
Call (210) 996-0797 or email letstalk@smartcorptechnologies.com with your contact information, installation address, invoice or other purchase evidence, a description of the issue, and photos or video if available. Report the issue promptly and allow reasonable access for inspection. Do not cut, peel, remove, or ship film or electrical parts before receiving instructions.